The physical properties of the Refractory Material

Structural properties

Macroscopic organization structure of refractory material is heterogeneous body composed of solid material

and gas hole. Porosity is the important factors influencing the products under normal temperature and high

temperature performance, especially under the condition of high temperature, is products to the outside world of

erosion resistance ability is greatly reduced. Reason of gas hole formation: when products molding, the air in

the material is completely ruled out. After material moisture ruled out, leaving space. Raw material calcined is

inadequate, some should decomposition of salt is the complete decomposition, should be burning ingredients

to burn completely. The material composition is uneven, when high temperature firing, contraction is uneven,

etc.

1. porosity

The porosity of refractory can be divided into: closed porosity, closed in the products is not connected with the

outside world. Open pores, closed at one end and the other end connected with the outside world, for fluid

filling. Cut-through pore, The two sides of the cut-through products, get through for the fluid.



2. Bibulous rate

Bibulous rate is absorbed by all the open pores in the products of water quality and the quality of the dry sample

ratio. Because the bibulous rate of determination method is simple, in actual production often used for

identifying the quality of raw material calcined. The raw material calcined is the better, the bibulous rate value is

the lower.

3. Bulk density

The definition of bulk density is the ratio of dry weight and total volume of products, also known as a volumetric

weight. Volume density intuitively reflects the degree of the density of the products, it is an important

measure indicator of  dense refractory products quality. But in the production of  lightweight insulation products,

in order to reduce the heat capacity and thermal conductivity, people use various means to reduce the products

volume density.

4. True proportion

The quality of dry material and its true volume (not including pore volume) ratio. The true proportion of refractory

material, can reflect the material composition of purity or the degree of crystal structure transition, proportion,

etc.

The thermal properties 

1. Thermal expansion

2. Thermal conductivity

The mechanical properties

1. Compressive strength