News

Detailed classification of clay brick specifications

More related products: Fused Cast AZS Block; Fused Cast Alumina Block; Fused Cast High Zirconia Block; Fused Cast Skid Rail Block

The primary factor for purchasing clay bricks is the clay brick size. Clay brick specifications are divided into five types: standard type, general type, special type, special type and super special type. The following is a detailed introduction of Zhengzhou Yuda Refractory Co., Ltd.:

1 standard clay brick. The standard clay brick size is 230mm × 114mm × 65mm.

2 common clay bricks. Any one of the following classification features is a general-purpose clay brick:

a. The quality is 2~8kg;

b. The thickness is 55~75mm;

c. no more than 4 scales;

d. The size ratio is not more than 4;

e. Without concave corners, arcs, grooves, rounds, holes, holes and acute angles ≤75°.

3 shaped clay bricks. Anyone with the following classification features is a shaped clay brick:

a. The quality is 2~15kg;

b. The thickness is 45~95mm;

c. size ratio is not greater than 6;

d. The total number of arcs and concave corners is not more than 2;

e. The total number of ditches and houses is not more than four;

f. An acute angle of >50° and ≤75°.

g. Without holes or holes.

4 special clay bricks. One of the following classification features is a generic clay brick:

a. The quality is 1.5~30kg;

b. The thickness is 35~135mm, and the length of the tubular brick is not more than 300mm;

c. the size ratio is not more than 8;

d. The total number of arcs and concave corners is not more than 4;

e. The total number of ditch and house is not more than 8;

f. An acute angle of 30° to 50°.

g. No more than 1 hole or hole.

5 Super-specific clay bricks that exceed the special characteristics.

Read more

Leave Message

For more information on any of our products please get in touch using the form below. One of our sales team will respond to your enquiry as soon as possible.